Forums  ·  Maps  ·  Files  ·  Steam Skins  ·  Tutorials  ·  Tools  ·  Faqs  ·  Search  ·  Submit Content join cs planet 
Counter-Strike
Forgot? · Register?
Powered by Level (3)
level3.com Internet & Data Hosting
  Creating a Counter-Strike Server - Linux: Install CS Source Online: 199 · 351 351 requests per minute
Browse all
de · cs · as
fy · he · ka Wad files
  Home  Search  Maps  Files  Skins  Forums  »   Need help? try search  
Tutorials
Server Management » Server installation and addons

Creating a Counter-Strike Server

Linux: Install CS Source (Page 5 of 7) by Sebastian · 4,849,187 views · comments(36934)
On this page we will explain how to install Counter-Strike and Counter-Strike: Source. We assume you have some Linux knowledge. We will start with Counter-Strike: Source first, If you want to install Counter-Strike 1.6 skip to Page 6 'Linux: Install CS 1.6'

Installing Counter-Strike: Source (SRCDS)


First, lets create a directory where we will run the hldsupdatetool, run the following command:
code:
mkdir srcds
Now we switch to the srcds we just created and download the hldsupdatetool.bin
code:
cd srcds
wget http://www.cstrike-planet.com/dls/hldsupdatetool.bin
If all goes well you should now have the hldsupdatetool.bin in the srcds directory. Now we change the permission of hldsupdatetool.bin so we can execute it and extract the contents from hldsupdatetool.bin
code:
chmod +x hldsupdatetool.bin 
./hldsupdatetool.bin
Note: after you run ./hldsupdatetool.bin you will get a prompt to agree with the terms and conditions, simply type yes and hit enter.

If all goes well, you should now have two files in the srcds directory, the hldsupdatetool.bin which we downloaded earlier, and a steam file the hldsupdatetool generated, this is the file we will use to install Counter-Strike: Source.

Note: if you receive a 'uncompress: command not found' message it means your server does not have uncompress installed. You have two options to easily work around this, try the following while logged-in as root:
code:
ln -s /bin/gunzip /bin/uncompress
Then try to run ./hldsupdatetool.bin again. If that does not work, or you do not have root privileges you can download the binary file we have available:
code:
wget http://www.cstrike-planet.com/dls/steam

Now that you have the steam binary file, Type the following command to begin installing CS Source
code:
chmod +x steam
./steam -command update -game "Counter-Strike Source" -dir .
Note the period after -dir

By now, the Counter-Strike Source install should have started:

SRCDS now installing
SRCDS now installing

Install times will vary anywhere between 30-60 minutes depending on your server connection speed and how congested the Steam network is. Once setup has finished it will display a "HLDS installation up to date" message. Now we are ready to start the server.

Counter-Strike command line options


Below is a list of options you can use when starting up the server.

-console
Initializes console mode

-autoupdate
Automatically update the server when Steam updates are released

-game <game name>
The HLDS mod you want to run

+maxplayers <number of players>
Amount of players to allow

+map <map name>
The map to start the server with

-port <port number>
The port number the server should run on. Can be left out if you plan on using the default port (27015).

-ip <ipaddress>
Useful if you have multiple IPs and want to assign a particular IP to the server.

There are a couple of ways to start the server; for simplicity we will go the easy way. We want the server to run in the background, so we issue the following command:
code:
./srcds_run -game cstrike -autoupdate +maxplayers 20 +map de_aztec > /dev/null 2>&1 &
If you are wondering what > /dev/null is; this will send no output, and the ending '&' will run the server in the background. This would be the most common way to start the server. Sometimes we like to see what is happening while the server is running, mostly for debugging purposes:
code:
./srcds_run -game cstrike -autoupdate +maxplayers 20 +map de_aztec > srcds.log 2>&1 &
The above will start the server, send all output (logging) to a file called srcds.log and run in the background. Everything the server generates will be sent to srcds.log, very useful if you want to see any errors that are happening while the server is running.

Note: if you choose to send output to a file, remember to periodically delete the file, it can grow quite large on an active server. Keep in mind this should be used mostly for debugging and not for a production server.


Page 6.


On the next page we'll cover CS 1.6 on Linux.


Did you find this helpful?
Yes it was Not really |

Still need help? Ask on the forums for additional help.


Bandwidth by Level (3) and N-Layer Communications Monday, 1-Sep 21:13:43 · feedback
© 2001-2008
Hosting & co-lo reliablesevers.com - Terms of Use - Privacy Policy. Use of this site signifies your agreement.
Not registered? Sign up